Safety technical measures for installation of belt conveyors

The safety technical measures for the installation of belt conveyors mainly include: conveyor line equipment

1. Installation technical measures

(1) Its installation, debugging, etc. should be carried out in accordance with the parameters and drawing requirements. Before installation, necessary inspections should be carried out, including anchor bolts, and whether the positions of each component are correct.

(2) The installation of the conveyor should first level and align the base, and then proceed in accordance with the specified sequence. Attention should be paid to the tightening of the base and foundation bolts, and there should be no looseness or other phenomena, otherwise problems may occur.

(3) The installation of the reducer and motor should be adjusted appropriately based on the driving wheel to meet the dimensional requirements of each part.

The support should coincide with the longitudinal center of the conveyor.

2. Safety measures for laying belts

(1) Before laying the belt, the site should be cleaned first, and the passage should be ensured to be unobstructed before proceeding.

(2) The supporting rollers of the intermediate frame should be complete and flexible in operation.

(3) The tools used for laying the belt must be complete and complete.

(4) Non construction personnel are not allowed to enter the construction site at will.

(5) The operation process should be carried out in accordance with the specified requirements and follow the instructions.