Removal of surplus materials from the mesh belt conveyor and precautions for operation

If the material on the surface of the mesh belt conveyor remains on it after it stops and does not work, it may cause certain harm to the mesh belt conveyor, which may lead to corrosion and mechanical damage. Translation machine

Although the corrosive effect of materials on the surface of the mesh belt conveyor has been considered when selecting it, if there is residual material on the surface of the mesh belt, it still causes corrosion on the surface of the mesh belt. The corrosion resistance of the mesh belt conveyor is not truly non corrosion, but rather prolongs the time of corrosion. The existence of excess material on the surface of the mesh belt causes the mesh belt conveyor to bear the weight of the excess material during the time it should rest during shutdown. Over time, the mesh belt of the mesh belt conveyor will experience fatigue and shorten its service life.

Today, we will focus on explaining to our users the issues that our operators should pay special attention to in the specific application process of mesh belt conveyors. It should be noted that this is crucial for both work safety and efficiency. Therefore, today we will focus on understanding this knowledge:

(1) In general, we recommend that the mesh belt conveyor should be supervised by a dedicated person during its operation. The caretaker must have general technical knowledge and be familiar with the performance of this conveyor;

(2) When taking care of the conveyor, our relevant technical personnel should regularly observe the operation of each component, check the connecting bolts at various places, and tighten them in a timely manner if any looseness is found. However, it is prohibited to clean and repair the operating components of the conveyor during operation;

(3) We should also note that during the operation of the mesh belt conveyor, non custodians are not allowed to approach the machine; No personnel shall touch any rotating parts. When a malfunction occurs, it must be stopped immediately to eliminate the malfunction. If there are defects that are difficult to eliminate immediately but do not have a significant impact on the work, they should be recorded and eliminated during maintenance. This point must be given special attention.

In summary, it also serves as a warning for users of the mesh belt conveyor. When not using the mesh belt conveyor, it is necessary to clean up the remaining materials on its surface, without any residue. This is a key point to increase the service life of the mesh belt conveyor.